About [vendorName] About [appName] [vendorName]'s [appName] is a discovery, management, logging, graphing, alerting and automatic corrective action solution for AVTECH environment monitoring hardware devices. [appName] is installed as a Windows Service and will continuously discover new devices while displaying and logging sensor data. With its Web Browser Interface, users can work with [appName] from anywhere world-wide! With [appName], [vendorName] environment monitoring hardware devices connected to the local network can be discovered. Automatic discovery utilizes a UDP broadcast scan on UDP port 30718. If a device has been connected to the network but is not discovered, a TCP scan of a range of IP addresses can be attempted in the 'Advanced Discovery Options'. Once the connected device has been discovered, sensor data will be logged for the device automatically. Clicking a device in the 'Device Status' tab panel will load the sensor data for the device in the main content area of the application. Device specific actions will also be displayed under the selected device in the 'Device Status' tab panel as well as in the 'ACTIONS' area of the displayed device in the main content area. If multiple devices are selected in the 'Device Status' tab panel, the actions that can be performed on multiple devices will display on a menu located on the bottom of the 'Device Status' tab panel. The 'Settings' tab panel allows for specific application settings to be configured. Discovery, Sensor Logging, Alert Logging, SMTP Email, Web Server, Security and Advanced settings are available, allowing users to configure [appName] to meet their specific needs. View the 'Settings' tab panel. If you have any questions regarding the initial setup and configuration of your Room Alert® or TemPageR™ device, the 'Help' tab panel has a number of links to online support materials that can assist you in resolving your setup or configuration issue. Click the link below to view the 'Help' tab panel. View the 'Help' tab panel.